HiBoost 200 Low Loss 15.2m 3D-FB cable N Conn

Availablity: Out of stock

49.45

Out of stock

Compare

15 m/ 50 ft HiBoost200 Cable 3D-FB

Key Features

  • 15m/ 50ft length
  • Low loss
  • Light, flexible and weatherproof
  • Low transmission delay
  • Minimum attenuation
HiBoost200 is a 50ft/15m low-loss cable with N-Male
connectors on both ends. It is used to transmit radio frequency (RF)
signal and is compatible with all the 50 ohm amplifiers. The cable’s
working frequency range is 0—6GHz.
PLEASE NOTE: If
you use a cable, which is longer than the one from your kit, mind that
your booster can lose power and provide worse mobile signal
amplification. Contact our Professional Tech Team
before buying an additional cable. 
Technical Specifications

General Characteristics

Inner Conductor: BC
Conductor Dia.: 1.12 +/-0.02 mm
Min. Break Strength: 453 N 

Insulation: Foam P.E
Insulation Dia.: 2.95 +/-0.15 mm
Centricity: ≥ 85%
Adhesion: 10 to 100N @ 25 mm

Shielding: AL/P-Foil (Bonded)
Foil overlap: ≥ 120 %


Outer Conductor
: TC Wire Braid
Coverage: 90 +/-3%

Jacket: FR-PVC
Outer Dia.: 4.95 +/-0.15mm

Mechanical Characteristics

Min. Bending Radius:

Installation: 12.7 mm
Repeated: 50.8 mm


Max. Pulling Tension:
245
Crush resistance of cable (load of 700N):
< 1 %

Rated Temperature
Storage/operating temperature: -40~+85℃
Outdoor Installation: -40~+85℃

Electrical Characteristics


Impedance: 50± 2 ohm
Capacitance: 78pF/m
Velocity ratio: 84%
DCR: Inner Conductor : < 17.6 ohm/km
DCR: Outer Conductor : < 16.1 ohm/km
Jacket Sparker: 3000 V RMS
Dielectric Strength: 1000 V DC
Insulation resistance: > 10,000МΩ·km
Peak Power: 2.5 KW
Shielding Effectiveness: >90 dB
VSWR: 30-2500 MHz  <1.20
Attenuation (at 20 ℃): dB/100m

30MHz: 5.80
50 MHz: 7.50
150 MHz: 13.10
220 MHz: 15.90
450 MHz: 22.80
900 MHz: 32.60
1500 MHz: 42.40
1800 MHz: 46.60
2000 MHz: 49.30
2500 MHz: 55.40
5800 MHz: 86.50

Maximum attenuation is 10% higher.
SKU: 4860 Category: