HiBoost Low Loss 1m 3D-FB cable N Male ConnecLight, flexible and weatherproof

A coaxial 3D-FB cable is mainly used for radio frequency signal
transmission. The length is 1 m. The working frequency range is 0-6 GHz.
This cable will perfectly suit all Huaptec mobile booster models.
NOTE: Mind, that too long cable for the booster kit
will decrease the signal enhancement power of the system. We highly
recommend to consult our Technical managers before a purchase. 

General Characteristics

Inner Conductor: BC
Conductor Dia.: 1.12 +/-0.02 mm
Min. Break Strength: 453 N 

Insulation: Foam P.E
Insulation Dia.: 2.95 +/-0.15 mm
Centricity: ≥ 85%
Adhesion: 10 to 100N @ 25 mm

Shielding: AL/P-Foil (Bonded)
Foil overlap: ≥ 120 %

Outer Conductor: TC Wire Braid
Coverage: 90 +/-3%

Jacket: FR-PVC
Outer Dia.: 4.95 +/-0.15mm

Mechanical Characteristics

Min. Bending Radius:

Installation: 12.7 mm
Repeated: 50.8 mm

Max. Pulling Tension: 245
Crush resistance of cable (load of 700N): < 1 %

Rated Temperature
Storage/operating temperature: -40~+85℃
Outdoor Installation: -40~+85℃

Electrical Characteristics

Impedance: 50± 2 ohm
Capacitance: 78pF/m
Velocity ratio: 84%
DCR: Inner Conductor : < 17.6 ohm/km
DCR: Outer Conductor : < 16.1 ohm/km
Jacket Sparker: 3000 V RMS
Dielectric Strength: 1000 V DC
Insulation resistance: > 10,000МΩ·km
Peak Power: 2.5 KW
Shielding Effectiveness: >90 dB
VSWR: 30-2500 MHz  <1.20
Attenuation (at 20 ℃): dB/100m

30MHz: 5.80
50 MHz: 7.50
150 MHz: 13.10
220 MHz: 15.90
450 MHz: 22.80
900 MHz: 32.60
1500 MHz: 42.40
1800 MHz: 46.60
2000 MHz: 49.30
2500 MHz: 55.40
5800 MHz: 86.50

Maximum attenuation is 10% higher.