5 GHz, LigoWave, Networking, Point to Point/multi point
LigoWave LigoDLB 5-90-20ac-PRO CPE PTM Base
Availablity: Out of stock
€401.07
Out of stock
CompareA Professional 5GHz PTMP Base Station with 802.11n and a 20dBi 90° Sector Antenna
LigoDLB PRO 5 – 90 – 20
- Integrated 5 GHz (2×2) MiMo radio
- Integrated dual – polarized 90 degree sector antennna (20 dBi)
- Frequency 5.150 – 5.850 GHz (FCC 5.150 – 5.250 and 5.725 – 5.850 GHz)
- Up to 30 dBm output power (country dependent)
- Improved noise immunity
- Dedicated 720 MHz CPU with 128 MB of Flash and RAM
- iPoll 3 – proprietary protocol for data transmission
- Powerful OS
- Gigabit Ethernet port
- 37 – 56 VDC PoE 802.3af (AC to DC adapter included)
- IP-67 standards rated enclosure
- Free WNMS (Wireless Network Management System)
- Professional mounting bracket
Powerful hardware platform
Based on a QCA 9557 chipset (720 MHz) and 128 MBytes of RAM/Flash memory
the LigoDLB PRO series access points are an ideal solution for resource
demanding installations with a high number of clients connected to a
single AP. The 48V Gigabit Ethernet port (802.3af) allows utilizing the
full capacity of the base-stations.
the LigoDLB PRO series access points are an ideal solution for resource
demanding installations with a high number of clients connected to a
single AP. The 48V Gigabit Ethernet port (802.3af) allows utilizing the
full capacity of the base-stations.
Integrated antenna design
The all-in-one design reduces the risk of cable failures and
decreases the signal loss, as the radio is connected directly to the
antenna. Such integration allows saving tower space and improves the
cost which helps to speed up your ROI.
decreases the signal loss, as the radio is connected directly to the
antenna. Such integration allows saving tower space and improves the
cost which helps to speed up your ROI.
Improved noise immunity
Metal enclosure works as a deflector eliminating interference caused
by backlobes and rejecting noise when multiple base-stations are
co-located on a single tower. Apart from RF shielding the metal housing
works as a heatsink, allowing better RF performance by dissipating the
heat generated by the radio.
by backlobes and rejecting noise when multiple base-stations are
co-located on a single tower. Apart from RF shielding the metal housing
works as a heatsink, allowing better RF performance by dissipating the
heat generated by the radio.
Solid mount
The LigoDLB PRO mounting bracket allows 15° down-tilt when doing antenna
alignment. Supported pole diameters are from 25 mm (0.98 inch) to 75 mm
(2.95 inches). All devices have an IP-67 enclosure and integrated surge
suppression to provide best in class protection from harsh weather
conditions in any climate zone.
alignment. Supported pole diameters are from 25 mm (0.98 inch) to 75 mm
(2.95 inches). All devices have an IP-67 enclosure and integrated surge
suppression to provide best in class protection from harsh weather
conditions in any climate zone.
LigoWave OS
LigoWave OS contains all of the essential features for establishing
fast, strong, and reliable PTMP networks. The LigoWave OS includes IPv6
Bridge & Router Support, SSDP & Bonjour Device Discovery
Options, Flexible Traffic Shaping, DHCP Option 82, and more. The user
interface is built on HTML5 with responsive design.
fast, strong, and reliable PTMP networks. The LigoWave OS includes IPv6
Bridge & Router Support, SSDP & Bonjour Device Discovery
Options, Flexible Traffic Shaping, DHCP Option 82, and more. The user
interface is built on HTML5 with responsive design.
iPoll 3: Enhanced Performance Protocol
LigoWave’s iPoll™ PTMP (Point-to-Multi-Point) proprietary protocol is
an innovative solution, eliminating transmission congestion and
close-cluster interference created in wireless PTMP installations.
an innovative solution, eliminating transmission congestion and
close-cluster interference created in wireless PTMP installations.
Hotspot scenario support
Starting from v7.52 Infinity firmware image can
be used on a LigoDLB series devices for the outdoor hotspot and other
related applications. After the firmware upgrade DLB devices are
converted into access points for outdoor hotspot networks and will lose
the functionality of point-to-point or point-to-multipoint connectivity.
be used on a LigoDLB series devices for the outdoor hotspot and other
related applications. After the firmware upgrade DLB devices are
converted into access points for outdoor hotspot networks and will lose
the functionality of point-to-point or point-to-multipoint connectivity.
